Dial Support > Front Hub > Front Center Lock Disc > Dial Center Lock Disc Non-Boost Front Hub
Dial Center Lock Disc Non-Boost Front Hub
This page covers everything you'll need to own and maintain a Dial Center Lock Disc Non-Boost Front Hub
Drillings: 24, 28, 32 hole
Spoke compatibility: J-bend
Exploded Diagram & Service Guide
Endcaps
Endcaps Needed for Hub conversions:
Please note that the left-side Torque Cap is a two-part design because of the lockring for the center lock rotor. Please see the Service Guide for installing Torque Caps for more information
If converting from 110x15mm thru-axle you may already have an E01 endcap.
We've listed all possible hub conversions for this hub in this table. If you're looking for something which isn't here check out a different model Dial hub to see if it's convertible to what you want.
